Call Us at (800) 875-4811
Shark Line 7812118 E817 Machine DIN-ANSI Spiral Point Tap With Black Shark, Right Hand Cutting, M6x1 Thread, D5 Thread Limit, B Chamfer, 3 Flutes, PVD/TiAlN Coated, HSS-E-PM
Shark Line 7812118 E817 Machine DIN-ANSI Spiral Point Tap With Black Shark, Right Hand Cutting, M6x1 Thread, D5 Thread Limit, B Chamfer, 3 Flutes, PVD/TiAlN Coated, HSS-E-PM
Shark Line 7812118 E817 Machine DIN-ANSI Spiral Point Tap With Black Shark, Right Hand Cutting, M6x1 Thread, D5 Thread Limit, B Chamfer, 3 Flutes, PVD/TiAlN Coated, HSS-E-PM
- Brand: Shark Line
- Mfr# : 7812118
- Item # : DPT 7812118
- Min. Order Qty: :
- Qty. Interval: :
Catalog
FEATURES
- Surface treatment - TiAlN-Top coating with an additional edge treatment
- Flute geometry - spiral point or low helix spiral flute geometries with low rake angle for good chip control and edge strength
- Cutting geometry (spiral flute taps) - the special three-radii profile with a constant rake angle along the flute length leads to better control of cutting properties and prevents nest formation of chips
- Tapping attachment (recommendation) - when using black shark taps, it is recommended to use synchronized (rigid) tapping
DESCRIPTION
Designed for high performance through hole tapping in high-strength and heat-resistant work materials with hardness up to 45HRC. The TiAlN-Top coating combined with geometry that significantly increases cutting edge strength, provides excellent performance and consistency in hard and difficult to machine materials.
Shark Line DIN-ANSI Spiral Point Tap, Machine, Series: E817, Measurement System: Metric, M Thread, M6x1 Thread, B Chamfer, 3 Flutes, HSS-E-PM, PVD/TiAlN Coated, Class of Fit: 6HX, Right Hand Cutting, 20.5 mm Thread Length, 90 mm Overall Length, 0.318 in Shank Dia, Material Application: Cast Steel, Hardened Materials, High Temperature Alloys and Steel, D5 Thread Limit
SPECIFICATIONS
| Type | : Machine |
| Series | : E817 |
| Measurement System | : Metric |
| Thread Standard | : M |
| Thread Size | : M6x1 |
| Chamfer Type | : B |
| Number of Flutes | : 3 |
| Material | : HSS-E-PM |
| Finish/Coating | : PVD/TiAlN Coated |
| Class of Fit | : 6HX |
| Cutting Direction | : Right Hand |
| Thread Length | : 20.5 mm |
| Overall Length | : 90 mm |
| Shank Diameter | : 0.318 in |
| Material Application | : Cast Steel, Hardened Materials, High Temperature Alloys and Steel |
| Thread Limit | : D5 |
APPLICATION INFO
| Standard/Approvals | : PROP65: Cancer and Reproductive Harm - www.P65warnings.ca.gov|RoHS Directives EU 2015/863/2017/2102 |
| Application | : For threading applications |
| Country of Origin | : IN |