Seco Niagara Cutter 17005485 C430 Center Cutting Extended Reach Single End Square End End Mill, 1/4 in Dia Cutter, 1-1/2 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 4 in OAL, Uncoated

Seco 02615896 Turning Insert, ANSI Code: CNMP432-MF1 TS2000, CNMG Insert, Material Grade: M, S, 120408 Insert, Diamond Shape, 12 Seat, Negative Rake, Neutral Cutting, For Use On Stainless Steel and Titanium/Super Alloys, Carbide, Manufacturer's Grade: TS2000

Seco 00033061 Milling Insert, ANSI Code: 218.20-0.375ER-M05 F25M, 218.2 Insert, 0.375 Insert, Carbide, Manufacturer's Grade: F25M, Irregular Shape, Material Grade: C2, C5

Seco 02569288 Indexable Turning Tool Holder, ANSI Code: DDJNR-16-4D-M, DDJN Tool Holder, DN..43. Insert, Right Hand Cutting, 25.4 mm Square Shank, 93 deg Lead Angle, Negative Rake, 152.4 mm OAL

Seco Secomax™ 02726563 Turning Insert, ANSI Code: CNGA432S-00625-L1-U CBN060K, CNGA Insert, Material Grade: H, 120408 Insert, Diamond Shape, 12 Seat, For Use On Hard Materials, PCBN, Manufacturer's Grade: CBN060K

Seco Niagara Cutter 17014088 REM710 Long Length Non-Center Cutting Single End End Mill, 1/2 in Dia Cutter, 0.025 in Corner Radius, 2 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 4 in OAL, Uncoated

Seco Secomax™ 02726569 Turning Insert, ANSI Code: DNGA432S-00625-L1-U CBN060K, DNGA Insert, Material Grade: H, 150408 Insert, Diamond Shape, 15 Seat, For Use On Hard Materials, PCBN, Manufacturer's Grade: CBN060K

Seco 00077900 Grooving Insert, ANSI Code: 10ER.046FG CP500, 10ER Insert, 0.046 Insert, Left Hand/Right Hand Cutting, 1.17 mm W Cutting, Manufacturer's Grade: CP500, TiAlN/TiN

Seco 00087632 MDT Indexable Turning Tool Holder, ANSI Code: CFIR10004D, CFI Tool Holder, LC..1604.. Insert, Right Hand Cutting, 25.4 mm Square Shank, 90 deg Lead Angle, 152.4 mm OAL

Seco 02615962 Turning Insert, ANSI Code: DNMG432-MR4 TS2500, DNMG Insert, Material Grade: S, 150408 Insert, Diamond Shape, 15 Seat, Negative Rake, Neutral Cutting, For Use On Super Alloys and Titanium, Carbide, Manufacturer's Grade: TS2500

Seco Niagara Cutter 17007764 REC448 Center Cutting Short Length Single End End Mill, 3/8 in Dia Cutter, 0.025 in Corner Radius, 3/4 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL, TiAlN

Seco 74001968 Parting-Off Insert, ANSI Code: 150.10-2.5N-14 T25M, 2.5 150.10 Insert, Material Grade: M, P, 2.5 mm W Cutting, Neutral Lead Angle Direction, 0 deg Relief Angle, Carbide, Manufacturer's Grade: T25M, TiC/TiCN/TiN