The 3M Particulate Filter 2091 helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. This filter helps protect against a wide range of oil and non-oil based particulate contaminants. Use with 3M Reusable Respirators 5000 Series or 3M Cartridge 6000 Series with 3M Adapter 502, or 3M Half and Full Facepieces 6000, 7000 and FF 400 Series with bayonet filter holders. Commonly used for welding, brazing, torch cutting, metal pouring and soldering. Flame resistant. NIOSH tested and approved to provide at least 99.97 percent filter efficiency against particles. When properly selected and fitted, use in a variety of applications such as grinding, sanding and welding for concentrations up to 10 times the OSHA Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces when quantatively fit tested. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

3M™, 7000051991, Particulate Filter, For Use With: 6000, 7000, 7800 and FF-400 Series Respirators, Acid Gas, Organic Vapor, P100 Filter Class, 0.999 Filter Efficiency, Bayonet Connection, Non-Woven, Resists: Flame, Water, Oil and Non-Oil Based Particles, 4.3 x 4.3 in Dimensions