The 3M Particulate Filter 2097, P100, with Nuisance* Level Organic Vapor Relief helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. When properly selected and fitted, use in a variety of applications such as grinding, sanding and welding for concentrations up to 10 times the OSHA Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces when quantatively fit tested. The filter also offers nuisance* level odor relief from organic vapors that are below the PEL. Works with a wide range of reusable respirator facepieces, including 3M Half and Full Facepieces 6000, 7000 and FF-400 Series. If used with 3M Adapter 502, the filter may also be used with 3M Respirator 5000 Series or 3M Cartridge 6000 Series. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. *3M recommended for relief against nuisance levels of organic vapors and acid gases. Nuisance level organic vapor and acid gas refers to concentrations not exceeding OSHA PEL or applicable government occupational exposure limits, whichever is lower.

3M™, 051131-07184, Particulate Filter, Series: 7000, For Use With: 3M™ 5000 Series Reusable Respirators, 6000 Series Cartridges with 502 Adapters, 6000, 7000 and FF-400 Series Respirators, P100 Filter Class, 0.9997 Filter Efficiency, Bayonet Connection, Polypropylene, Magenta, Resists: Nuisance Level Organic Vapors, Oil and Non-Oil Based Particles, 4.3 in L x 4.3 in H Dimensions