3M™ die-cut sandblast stencil 519YS features a double liner design for optimum support for center of letters, numbers and designs. The translucent yellow inner liner heightens visibility of cut designs during positioning and blasting. The white polypropylene liner is more conformable to run through commercial plotters and releases easily to help avoid stretching and distortion of design. Ideal for slot fed formats, 3M™ die-cut sandblast stencil 519YS helps protect granite, marble and other stone surfaces during blasting applications. It is recommended that this stencil be applied to a warm, clean and dry surface. When the stencil is applied to cold stone surfaces it is possible for condensation to form as the stone warms. Condensation can affect the performance of the stencil's rubber adhesive. To minimize shrinkage, allow rubber backing to relax before applying to the stone. Rub down firmly to adhere stencil to the stone. Use 3M™ sandblast filler #2 to help increase adhesion and hold stencil to polished stone surfaces. Use 3M™ sandblast filler #3 on axed or frosted surfaces if increased adhesion is desired. In our 3M™ industrial adhesives and tapes division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently.

3M™, 7000123994, Sandblast Stencil, Die Cut Double Liner, 30 in Overall Width, 44 mil Thickness, Polyester Liner/Rubber Adhesive and Backing, Tan