3M™ PPS™ adapter converts paint spray guns for use with the 3M™ paint preparation system (PPS™ ). Specifically designed adapters, allows painters to use the PPS™ with virtually any spray gun model. To use this adapter, remove the existing spray gun cup. Then simply thread the correct PPS™ adapter into the spray gun. 3M™ PPS™ adapter converts leading commercial spray guns into ones that can use the 3M™ paint preparation system (PPS™ ), save workers time in the preparation of paint materials - measuring, mixing and filtering of paint materials. PPS™ is an all in one disposable painting system that produces cleaner jobs, saves on paint consumption, reduces solvent usage by up to 70% and improves the operator's efficiency by up to 50% between the prep (mixing, measuring and filtering) and cleanup time (time associated with cleaning the paint reservoir and spray gun). Specifically designed PPS™ stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun. Painters can also use the 3M™ Accuspray™ replaceable atomizing head spray guns to further reduce solvent use and spray gun cleaning and maintenance time. To use the PPS™ adapter, remove the existing spray gun cup. Then simply thread the correct PPS™ adapter into the spray gun unlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With pps™ , you place the disposable liner within the re-usable PPS™ cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying. PPS™ allows the painter to spray consistently 90 deg to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS™ is a closed system, you can operate in any orientation - i.e. 360 degrees. After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. Of solvent. Specifically designed PPS™ stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun. Painters have also the option to use the 3M™ Accuspray™ ONE spray gun, which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time. Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and cleanup time by as much as 15%.

3M™ PPS™ Spray Adapter, Type 10, For Use With: 3M™ Paint Preparation System, Specifications: 1 in ID, Stainless Steel